News Ticker

An Optofluidic Chip for Single-cell Sorting Based on Mechanical Properties

A monolithic optofluidic chip fabricated by femtosecond laser extracts highly metastatic cells from a heterogeneous population on the basis of optical stretching measurements.

The past decade has seen an increasing interest in the analysis and sorting of single cells. Progress in this field has enabled researchers to overcome the limitations presented by heterogeneity in populations—found even in nominally identical cells—which poses severe challenges for many experimental measurements.1 As a parameter for cell analysis, mechanical properties are attractive because they are sensitive markers of cell status, related to both pathological and physiological changes such as carcinogenesis,2 differentiation, and proliferation.3 In contrast with alternative approaches, such as fluorescence-activated cell sorting, grouping on the basis of mechanical properties requires no specific marker to be exploited. There are several proposed techniques for measuring single-cell mechanical properties, including atomic force microscopy,4 micropipette aspiration,5 magnetic bead rheometry,6and optical tweezers.7 However, these methods have low throughput, and generally require direct contact with the cell, which may hamper its viability. While it is possible to achieve high throughput by purely hydrodynamic techniques,8 these only allow for single-cell mechanical analysis, without offering the possibility of sorting and extracting specific subpopulations.

To overcome all of these limitations, we may instead use a microfluidic optical stretcher, a technology that exploits optical forces to induce cell deformations, and which can be easily integrated in a microfluidic device. In doing so, we create an efficient tool to investigate cellular mechanical properties at the single-cell level.

An optical stretcher is typically built by placing two optical fibers facing one other, so as to obtain a dual-beam laser trap. We deliver the cells to the trapping region through a microfluidic channel that is designed to guarantee a controlled cell flow. Once a cell is firmly trapped, we achieve stretching by increasing the laser power at the fiber output.9

We realized a microfluidic stretcher with sorting capability driven by a cell’s mechanical properties. We used femtosecond laser micromachining (FLM),10 a technology that enables integration of microfluidic and optical functions on the same glass chip, rapid 3D prototyping, and inherently precise alignment between optical and fluidic components. FLM is a two-step fabrication process. First, we realize permanent material modification through the nonlinear absorption of focused femtosecond laser pulses. Second, we etch the laser-modified zone using a hydrofluoric acid (HF) solution. Our microfluidic optical stretcher is composed of optical waveguides perpendicular to a microfluidic channel. By adding a Y-shaped bifurcation at the channel output, we exploit the optical forces to stretch the cell and also to push it toward the stream of one of the two outputs: see Figure 1(a). To limit roughness, we fabricated the channels parallel to the writing beam by irradiating them from the bottom to the top of the substrate, as shown schematically in Figure 1(b).11 We realized the central channel, with a square cross section, by irradiating overlapped squares at different depths. The laser power and scanning velocity were varied along the substrate depth to overcome the effects of spherical aberrations. We obtained the Y-shaped branches by multiscan irradiation of lines to produce a channel the same height as the central one. We created access holes for the tubing connection by irradiating four coaxial circular helixes at each termination of the Y-branches. The irradiation pattern is shown in Figure 1(b).

Figure 1. (a) Working principle of the single-cell stretcher and sorter. Optical forces exerted by two optical waveguides facing the microchannel stretch cells and push them toward the desired output on the basis of their deformability. (b) Schematic rendering of the double-Y-shaped microfluidic circuit irradiation pattern. Fabrication of the device is by femtosecond laser micromachining. (c) The final device obtained after chemical etching.

In the same irradiation step, we also fabricated the optical waveguides for the stretching and sorting functionalities. After irradiation, we immersed the glass substrate in a 20% HF aqueous solution in an ultrasonic bath at 35°C for 1.5h. The final result is shown in Figure 1(c). We tested the device with an experiment aimed at a selection of cells from a suspension containing two different cellular lines of human melanoma: metastatic A375-P, and highly metastatic A365-MC2. When injected into the device, this suspension presented an equal concentration of the two cell lines. Each showed the same cellular size, but different deformability, as previously verified through an optical stretcher: see Figure 2(a). We chose a specific value of deformation as a threshold for selection, enabling separation of the population into two groups. In this specific case, we obtained an enriched A375-MC2 subpopulation by stretching all the cells and collecting only those with deformability higher than the threshold: see Figure 2(b).

Figure 2. (a) Normalized cellular distribution of human melanoma cellular lines A375-P and A375-MC2 as a function of their optical deformation. As an example, an 11% threshold is depicted and the colored areas show the number of cells expected in the collected sample for this threshold deformation value. (b) Percentage of A375-MC2 in the output of the sorted cells as a function of deformation threshold. Experimental points are reported together with the theoretical curve. Error bars are standard deviations.

In summary, we have proposed an integrated device that achieves stretching, sorting, and collection of single cells on the basis of their mechanical properties. This enables a new set of biological investigations, ranging from the sorting, separation, and analysis of cells with different mechanical properties, to the selection and recovery of cells showing specific mechanical response to drug treatments. Our future aim is the exploitation of this device as a building block in a complex optofluidic platform for single-cell analyses.

The authors are grateful for support from the Cariplo Agency, and colleagues from the University of Pavia who performed the biological experiments.

Francesca Bragheri, Rebeca Martinez Vazquez, Roberto Osellame

Institute for Photonics and Nanotechnology

Milan, Italy

Francesca Bragheri received her PhD in electronic engineering at the University of Pavia. Since 2012 she has been engaged in research into the development of new biophotonic devices for optical manipulation of single cells, and fabrication of these devices by femtosecond laser.

Rebeca Martinez Vazquez studied physics at the Autonomous University of Madrid, Spain, where she also obtained her PhD. Since 2010 she has been engaged in research activity based on the irradiation of polymer and glass materials by femtosecond lasers to fabricate microfluidic channels and photonic devices, and the integration of these devices in microfluidic chips.

Roberto Osellame is a research associate and a contract professor at the Polytechnic University of Milan. His scientific interests include nonlinear and integrated optics, optical communications, femtosecond laser micromachining, and lab-on-chip technologies. He is a program committee member for the CLEO-Europe and SPIE Photonics West international conferences. He has been involved in several European projects and has been the coordinator of the European Commission Seventh Framework Programme Specific Target Research Project microFLUID.

Petra Paiè

Polytechnic University of Milan

Milan, Italy

Petra Paiè holds an MS in nano-optics and photonics, and a BS in engineering physics. She is currently a PhD candidate in the Department of Physics, where her main research interest is the application of femtosecond laser micromachining to developing integrated optofluidic devices for biological applications.

1. N. de Souza, Single-cell methods, Nat. Methods 9, p. 35, 2012.
2. S. Kumar, V. M. Weaver, Mechanics, malignancy, and metastasis: the force journey of a tumor cell, Cancer Metast. Rev. 28, p. 113-127, 2009.
3. A. Ekpenyong, G. Whyte, K. Chalut, S. Pagliara, F. Lautenschlager, C. Fiddler, S. Paschke, U. Keyser, E. Chilvers, J. Guck, Viscoelastic properties of differentiating blood cells are fate- and function-dependent, PLoS One 7, p. e45237, 2012.
4. R. Mahaffy, S. Park, E. Gerde, J. A. C. Kas, C. K. Shih, Quantitative analysis of the viscoelastic properties of thin regions of fibroblasts using atomic force microscopy, Biophys. J. 86, p. 1777-1793, 2004.
5. A. Vazirir, M. R. K. Mofrad, Mechanics and deformation of the nucleus in micropipette aspiration experiment, J. Biomech. 40, p. 2053-2062, 2007.
6. A. R. Bausch, W. Moller, E. Sackmann, Measurement of local viscoelasticity and forces in living cells by magnetic tweezers, Biophys. J. 76, p. 573-579, 1999.
7. Y. Z. Yoon, J. Kotar, G. Yoon, P. Cicuta, The nonlinear mechanical response of the red blood cell, Phys. Biol. 5, p. 036007, 2008.
8. J. S. Dudani, D. R. Gossett, T. K. Henry, D. Di Carlo, Pinched-flow hydrodynamic stretching of single-cells, Lab Chip 13, p. 3728-3734, 2013.
9. J. Guck, R. Ananthakrishnan, H. Mahmood, T. J. Moon, C. C. Cunningham, J. Kas, The optical stretcher: a novel laser tool to micromanipulate cells, Biophys. J. 81, p. 767-784, 2001.
10. R. Osellame, H. J. Hoekstra, G. Cerullo, M. Pollnau, Femtosecond laser microstructuring: an enabling tool for optofluidic lab-on-chips, Laser Photon. Rev. 5, p. 442-463, 2011.
11. T. Yang, P. Paiè, G. Nava, F. Bragheri, R. M. Vazquez, P. Minzioni, I. Cristiani, An integrated optofluidic device for single-cell sorting driven by mechanical properties, Lab Chip 15, p. 1262-1266, 2015.
Source: SPIE DOI: 10.1117/2.1201510.006179